has any member done this and where can you find affordable parts? would anyone have a non smoky engine for sale?
Risky, the wrecker at Tuggerah had a 3LN a few weeks ago with a supposed good engine I looked last night & he's still advertising the FZR Address: 2/9 Bluegum Close, Tuggerah NSW 2259 Phone02) 4351 6995 Hours: SundayClosed Monday8:30 am - 5:30 pm Tuesday8:30 am - 5:30 pm Wednesday8:30 am - 5:30 pm Thursday8:30 am - 5:30 pm Friday8:30 am - 5:30 pm Saturday8:30 am - 5:30 pm
there's part on ebay out of china, pistons, rings, bearing shells and valve stem seals most expensive part is head and cylinder base gaskets
I did stumble upon both cylinder base and head gasket for $100 on ebay recently Under no circumstances would I pay full price, I'm not sure I would actually survive the sticker shock of hearing the price
this guy has some gaskets, heaps cheaper than ebay http://www.bkperformance.com.au/adv...Csid=1949154a28f112e9c3930e5e2e6b16b0&x=8&y=7
valve stem seals http://www.ebay.com.au/itm/Valve-Stem-Seal-1-set-16-pcs-FZR250-/291061654950 head and cylinder base gaskets http://www.ebay.com.au/itm/Yamaha-F..._Parts_Accessories&hash=item3388853fd5&_uhb=1
might be worth doing the valve stem seals whilst checking the valve clearances, then give it a run before checking the compression
blowing smoke at high revs. 55k on the speedo. will do an oil change today if i find a filter in the drawers i have.
everything except head gasket and cam chain now ordered.has anyone worked on these yet?long time since i rebuilt a bike engine. last one was a katana in the 70,s or early 80,s.
was going to suggest this guy for an engine, when I enquired about a stator for mine his price was $50, when other came back at $90 & $110 without the cover http://www.ebay.com.au/itm/YAMAHA-F..._Parts_Accessories&hash=item58a852625f&_uhb=1 I'd like to know the parts sources you ended up going with
I've got that sellers parts bookmarked Did you go for just rings, or pistons & a full set of bearing shells also?
rings, mains,big ends, valve stem seals...165 aus.sump and lower barrel gasket from aus. still looking for head gasket. mains and big ends may not be needed but not wasting time.
there's a head gasket on ebay, but it's $109 for both head and cylinder base gaskets I hope that you document your build process