Separate names with a comma.
I didn't find anything in that section regarding that, I used search too I heard about adjusting the exup cable too??
I need to tune my bike. I've only got it to 120kms/hr, and it idles fairly weakly, and has a major flatspot from revving the throttle until when...
Were the forks meant to be off the freaking bike? I took off the caps and the shockies depressed completely, so i can't pump the forks at the...
lets driveeeeeeeeeeeeeee
Oop, uh-oh, i'm in trouble
I've let the oil out of my forks to go for a roadworthy so the tiny tiny leak from pitting won't.. leak. Anyhow, how do i fill them back up after
Oh yeah, i should have mentioned the foot lever doesn't have the play it usually does. As the edit says, jammed brake lever. Suggestions?
The pads are plentiful, like probably 5-6mm, its dark so I can't go out and check. The bike only has 10.5k's on it so thickness isn't a problem....
So I took my bike for a ride, came home and cleaned it, and then went to take it for a ride and noticed the brake light was on. The back brake...
The oil tank is exposed on the right side of the bike. So looking at the exposed side of the tank, its coming through one of the bolt holes that...
So I was doing my fork seals and I hadn't done it before, and the new seals weren't fitting so I just took the forks themselves into a yamaha...
I'm in qld, so I have to admit I have no idea what pink or blue slips refers to.
Ok, can anyone tell me A - What I need to get from the shop b4 doing the fork seal replacement B - If the above mentioned possibilty with...
Anyone?
As far as the oil tank situation goes, its leaking, but not dripping. And a ridiculously small leak at that. As for the fairing, I had...
I'm about to go for one, but I'm wondering what are some things I should definitely look for and do before taking it in? I really don't wanna get...
just the typical rubbery sound squeak. creaky gate type squeak not metal on metal
There's plenty of meat on the pads so I'm not sure what conclusion to come too?
Yep Casso Sorry bro, i was vice versa-ed about engage/ disengage. But yeah, the clutch pretty much disengages once its been pulled a little...
The problem is that my clutch engages after I've pulled it about less than a centimetre from its normal position. Trying to find a friction point...
