..specifically the 4 that fit over the spark plug holes under the cam cover. I didn't have the genuine ones available when servicing the engine so used standard rubber o-rings, so now (of course!) one of them is leaking and I have oil dripping from the plug drain hole onto the exhaust. Does anyone know a supplier of these or if another model shares the same part? Thanks.
Part number 11009-1843 ? Have you asked a Kawasaki dealer if they keep them in stock ? http://www.ebay.com.au/itm/KAWASAKI...ER-11009-1779-11009-1843-RUBBER-/201036978017 http://www.ebay.com.au/itm/Barrios-...167129?hash=item41b175e259:g:~AIAAOSw65FXv96i
Do you mean these highlighted below ? I just found another thread here with the same question, they are 28.0 x 2.0 If they are just normal o'ring's try a bearing shop they may have some slightly thicker ?
http://m.ebay.co.uk/itm/KAWASAKI-ZX...79-11009-1843-RUBBER-/201036978017?nav=SEARCH That's where I got mine. Sent from my HTC Desire 620 using Tapatalk
Megazip also have them. http://www.megazip.net/zapchasti-dl...head-cover-13885114#/il-325126100/pr-10487510 Sent from my HTC Desire 620 using Tapatalk
Thanks all. The Ebay link work out at £55 (with post) - very expensive when I only need 4 o-rings ! Megazip only have 2 in stock. It's confusing because the C-model fiche shows normal o-rings (as in my67xr's thread) but part 11009-1843 is definitely not a standard o-ring (and pisses oil on mine )
Spares aren't going to be cheap. http://yahoo.aleado.com/lot?auctionID=c564486411 Sent from my HTC Desire 620 using Tapatalk
Cheers Adam. I'm thinking to pull the cover and make my own from some rubber matting (how hard can it be? )
These look like they might be difficult to source in the future, so I ordered an OEM one and will use it to make the mould. They will be reasonably priced, made from Viton and free shipping. Lead time is usually about 10 weeks. cheers Blair