Hello everyone,I'm a new guy from China.I can't receive recaptcha in China.I asked my friend for join this big family.My carb's float valve is damaged. So I bought 4 new,but my carb's tang are adjusted.Zxr250's service manual show the float height should be 13±2mm,and fuel level should be 9.5±1MM below mark.But I adjust float height to 13MM is too rich that can't start.So I need everyone help me,tell me your usable fuel level and float height please,I really need everyone's help. By the way ZXR250/balius use same carb and engine,just a little different with them.So I think they have same fuel level and float height. Thank for you reply
OK. If it is running rich with 2.5 turns, try 2.25 or 2 turns out and see if it improves how the engine runs