Hey guys, Been gettiing a bit of clutch slip in the higher rpm. Have readjusted several times, dumped oil, and all the rest of it. Think the clutch might be cactus. Where do people get their plates from, and how hard is the install? Cheers
http://www.slipstreamperformance.co...XR250-1990-1998-Ferodo-clutch-friction-p.aspx http://www.slipstreamperformance.co...i-ZXR250-1990-1998-Ferodo-clutch-springs.aspx http://2fiftycc.com/index.php?resources/kawasaki-zxr250-service-manual-part-6.38/
I've been getting them from ebay & all good so far, don't buy the cheapest & get them from Aus, quicker. I'd recommend getting a set of friction plates & springs, the steel plates should be ok unless the clutch has been slipping for a long time & they've cooked. Also important to get a gasket for the side cover, you'll definitely need one or she'll leak oil. It's a very simple job, have a go & take your time, look closely at everything as it comes off, have the camera there & photograph it all as it comes apart, watch your bolt lengths, some may be longer, mark them with a pen or something, where they go.
m.ebay.com.au/itm/321413284523?nav=SEARCH This kit had the friction plates, steel plates and springs. I'm gonna look into getting hopefully soon as my clutch also feels like it is slipping.
