i changed the fork seals on my mc19 (track bike) but guessed the amount of oil to put back in,anyone know the correct amount,im using a heavier wht oil but its traveling to far under brakes,ive allready pre loaded the springs so i think it must be the qty of oil that needs attention
Hi mate, you can get a manual here http://www.perthstreetbikes.com/forum/f37/service-workshop-owner-manuals-123361/ but you will need to join their forum. I have a few mc19 parts for sale. tank and rear wheel http://shop.ebay.com.au/vinjcycles/m.html?_trksid=p4340.l2562 and a head, not listed yet.
I see they show the spring narrow pitch to the bottom, on all the earlier bikes it is at the top, times change.
thanks for the pic cris it seems i had just over the qty that is recomended so i'll try pre loading it up a bit more,for normal riding its proberly ok but on a tight track under hard braking its compressing a bit to much anyway thanks for the info.