I have the last bits and pieces from the dead FZR250 3LN3 I had as a donor for my Project SRX250. Happy to do a deal for everything... I really just want it gone. I do get around NSW from Sydney out West as far as Dubbo... up to Moree, across to Tamworth and even Nth Coast (to Grafton) for work so I can arrange to deliver if that works... subject to my work schedule Exhaust Headers (less EXUP Valve) $30 Tail light and number plate holder (lens broken) $10 Rear Guard $10 Airbox $15 Dual headlight $20 Rear Fairings - Look to be original plastic but have been repaired (poorly) $50 the set Front fairing.. Rubbish really $5 or free with the other fairings as a group lot. Rear Subframe, perfect condition really.. $50 RHS Main Fairing - This one is a slight weight FRP item that is average... $40 LHS Original (I think) ABS plastic Main Fairing with some average repairs done to it... $50 No idea whose mobile that is and I somehow doubt the price tag on it...lol Both fairings have the Tube mounts to the Deltabox fame. One piece fuel tank... I will drill out the filler lock and get pics of the inside but seems ok $100 No obvious dings... Radiator, thermo fan, thermostat housing and overflow bottle - $30 There are a few other bits an pieces... riders and pillion seat in good nick $30 the pair A half reasonable (not too badly mangled) main wiring harness and lamps / gauges harness $15 CDI unit $40 ( I need to find it and put up the serial number). Side stand including switch $10. Most of the prices have been set after looking at comparative bits on Fleabay and then lowered to what I would be happy to pay... Happy to negotiate sensibly for any of the items or the lot... PM me if there is anything that takes your interest or you want better pics of. Cheers
I stand corrected... the Original bike was a 3LN-21 (according to the model number stamped in the the steering head) not a 3LN-3... I am not sure what differences there are but I figured I should put the correct info up.
Hey Andy, do you still have the riders' seat, and if you still have it the petrol cap ? I want to retrim a seat for mine with a thicker layer of foam for highway cruising, and the petrol cap i need it for the flap spring so it wont matter if the lock's been drilled Airbox would be nice too but i think postage to SA might make it too expensive Cheer's, Craig
Seat is all good... umm I will look to see if the airbox is there... havent been out to look at the bits for a little while. The fuel cap went with the tank.. It shouldnt be too bad for freight... I sent the tank to Melbourne for around $35 and the airbox should be less bulky than that...let me check tomorrow when there is light and I will send you some pics.
