Separate names with a comma.
Solved by My67xr. Someone (previous re-builder) had fitted a hose between the two vents on either set of carbs. As soon as i removed this, bike...
Will give them a good clean out as well. Cheers might be just the thing. Having had a good look at the diagram and thinking about it, I think...
Yeap just about to order them.
Yes, nothing really wants to stop it. Can drain a lot of fuel relatively fast too. :(
[ATTACH] Yes replaced the seat as well, but reused the old o ring. Tested that there was no leaking from around it though, but might run another...
Hi Maelstrom Firstly the float needles (shown in GreyImports post) are fitted to the tang of the float by sliding onto the tang using the wire...
Yeap, brand new ones in and just the same, so 'think' I have ruled that out.
Hi Guys. Have been struggling with this one for a while, so looking for some advice on a path to move forward. Am rebuilding the above bike, and...
Oh now that might be handy.. lol as long as marital bliss is not interrupted of course. Yeap already a premium member, and have the resources...
Yeah I suspect it was just a refresh ready to be 'used' for racing. The second bike was to become a race bike (apparently). Once I get them...
Hi Blabz Both are GJ72A's Great looking bikes. The third engine is apparently a 'Race' engine, so I am not sure what the difference will be with...
Just purchased a bike (after 25 years away from riding). Bought two, both in various states of completeness. One is almost ride-able, but has an...