Separate names with a comma.
Lol thanks.. no plans of parting out the spare motor yet sorry. No one interested ?? :)
Hi all For sale my zxr 250 c model with spare motor. Bike looks daggy but In good running condition. Spare motor runs as well but missing stator...
Hi thanks for that. Clutch is not really slipping but i thought i would change the fibre plates anyways as not sure if its ever been changed Ive...
Hi all i have these clutch springs from ebay from walker clutches. The listing was for zxr250 c model bike so i got them. However the spring...
Is it okay if i check the float levels with the tangs resting on theh float valve but not compressing it or do we need to position the carbs as...
Btw Steel plates were $14 each but havent ordered them as It needs 8 of them. Ill see how the original ones are first
Lol no i was just there checking the prices. It came to $15 per fric plate from kawasaki and about 15 for the gasket. So thats about $90.00....
Thanks .. ive orders plates and gasket from pt stevens lets see how it goes.
Hi all are the c models all the same ? Specifically the clutch friction plates and timing chain? The resources section has part nos for zx250...
Yea thats the one. If you end up getting it heres a good way to install the straps as it doesnt come with any instructions lol. [MEDIA]
Yes new fork oil made it heaps better. Than last week. Amazing how much speed difference there is between no confidence vs confidence in the front...
Hi guys went to the Reefton yesterday awesome weather and roads were good as well. Some photos. [ATTACH] [ATTACH] [ATTACH]
Was just having a look at the fork spring service limit it only takes about 4 mm !! Didnt realiase 4 mm made that much of a difference. My springs...
Thanks all.. finished changing the oil yeaterday.. rode today.. feels much better.
Thanks .. sorry checked the manual again it says rest the level gauge stopper on the outer tube. So its the outer tube : )
Hey the manual doesnt say is the level measured from the top of the outer tube or the inner tube ??loll
Thanks for all the help guys! Btw planning to do the fork oil today not sure whats in it atm but manual says 5w. I weigh about 80kg do you think...
How high should it go ideally?
Okay.. i have check voltage at battery while revving the bike. It goes upto 14.35v and sometimes 14.6 ish
Can that cause loss of power at a particular rpm?