Separate names with a comma.
Photos taken when I rebuilt my Balius front caliper: http://2fiftycc.com/index.php?threads/reminiscing-about-my-old-balius.8630/page-2#post-88763
2012 KT250EXC-F: [IMG] Previous bikes: 2006 GasGas FSE450: [IMG] 1999 Husqvarna WR360: [IMG] 1994 Husqvarna WR360: [IMG]
Hell yeah! Love the KTM540 and 550. I bought a 1991 KTM540e/xc back in 2000. It's sitting in storage these days, and some day I'll get it...
Have a look on www.aliexpress.com
Bullshit. Do some research on this - there will be a way that you can take legal action against the driver without involving lawyers. There are...
Someone else on my Aprilia SXV550: [IMG] [IMG] The header pipes on the SXV get a tad hot when the fast idle knob (ie choke) is on. It's because...
Thursday, 26th May, 2016 When I originally removed the fuel tank I poured the contents into a bucket. I haven’t figured out a solution for...
Wednesday, 25th May, 2016 After my disastrous attempts at electrolysis it was time to do something simple. For the grand total of $10.12 I...
Thursday, 19th May, 2016 After bombing out with my attempts at electrolysis I tried using a different charger. That one had an option for trickle...
Sunday, 16th May, 2016 It was time to do an easy and relatively minor job - flush the rear brake fluid. [IMG] The old rear brake fluid wasn’t...
In other news, I'm also trying to figure out how to replace the boring Tokico two-piston caliper with a Brembo 4-piston caliper. There are...
It did for a little bit, but the jumper cables that I ran from the battery to the fuel tank also got very hot. There was electrolysis for a...
Nup, I can't get it to work consistently. There has been some electrolysis - there's the build-up on the eye-hook bolt, and the orange water that...
Wednesday, 11th May, 2016 I had been looking everywhere on the internet to find a front caliper rebuild kit in Australia. There are numerous...
Monday, 9th May, 2016 I still can’t get electrolysis to work consistently for cleaning the rust out of the fuel tank. I poured the contents into...
Wednesday, 4th May, 2016 I’m a big fan of speed bleeders - they are a brake nipple that has a small value inside. This means that, when...
Tuesday, 3rd May, 2016 After leaving the electrolysis setup running for a day I returned the next night to find that that most of the water had...
Monday, 2nd May, 2016 Time to start on cleaning the rust out of the fuel tank. This bike also has a fuel level gauge in the speedo cluster, so...
I just did some searching for this and found two sources: - Maxwell Motorsports - showing that part number for coils for a Honda TRX400EX...
It's been a year... any progress on this one?
