Separate names with a comma.
Hey Chris, I don't have a trailer so i don't know how to bring it to workshop, i'm so relieved when you said it was pretty much exactly the same...
Great write up! A little iffy about how exactly the rear fairings slides off?
Seems like the edit button has been removed from posts!
I've given up, sending it to K-Tec Racing to have a look sometime this week or early next. Since i've changed over the carbies i have opened them...
[img] [img]
Hi guys, Everytime carburetors are installed (After coming from another bike) or opened do they need balance and synchronizing (Even if they were...
My bike is finally sorted, I'd like to give a big thanks to chris and phil for giving me a big help along the way. I finally took the time to...
How is it adjusted? Do I use a flathead screwdriver? Also I ended up adjusting the screw that is attached to the throttle cable, which allowed me...
Throttle cable seems fine, where is carby adjuster located? There is another line with a Black plastic screw looking thing.. Is that it..? When I...
Changed over carbys, now I crank and doesn't start, Cranking is good but not starting, I put a 30ml of fuel into each carby still no luck. Any...
Great write up, :)
AUTOSOL, Gold colour tube. Sold at most automotive stores (SCA, repco, autopro, etc)
Finally got to watch it, was totally unexpected and sneaky.
Heards heaps about this but never got a chance to watch the video. If you watch world wide top racers like schumacher, you will notice they do...
Chris, I have removed the tops already plenty of times to clean the carbys, so i do know how to open the trunk very well now. I just don't know...
If it were 1600rpm, how would you know what the rpm is at on idle if tacho starts at 3k.. If the tacho started at 3000rpm it would make sense to...
Phil, Can i actually remove the carbs without remove the fairings? My trunk hasn't been working since i've had the bike and i've always tried to...
Hey guys, I only got my 250cc and under RE licence just over a month ago. I live in NOR Perth, WA. This is my first 250cc forum i have joined and...
I heard synchronize and balance are they the same or two complete different things that need to be done to carburetors? What is difference...
Request: Hopefully on a Suzuki Across Pictures when somebody open's their carburetors and checks float levels as i have no idea how to do that,...