Separate names with a comma.
The noise was actually coming from the relay, so I guess the solenoid; It was simply not getting a firm connection because my battery was dying,...
I may give a go at rebuilding the starter once again as I can't really afford a specialty mechanics fees, also after recharging my battery, it's...
Hello again, you may remember my pleading cries from my classic carb clean thread, now I return to you with a new problem. My bike was running...
I am pleased to say the bike was running well.. for about 2 minutes, then a strange ticking sound came from the gearbox area so I quickly shut it...
Alright providing a nice update here. The bike ran today after I changed the gas full of additives out for some fresh ethanol free 91, then I...
Couldn't try it as I don't have any and no money till Friday, if it's still not going by then, then I may give it a go. Found I had set the float...
Okay, so I cleaned out all of the passages I could with brake cleaner, the starter(?) jet was actually pretty clogged it seems, and I checked the...
I was considering that if the diaphragms were properly rotted; Do you know if later model carbs are compatible with my motor? I don't have a...
I do have a JIS Impacta but it was no good, screws were just too degraded and seemingly very overtightened.
I have reset them once but haven't yet removed them, I'll give that a go. I don't know if this is exactly what you wanted but I can say for a...
Alright, I'll dismantle the whole units and soak them. Will report back if it works.
I've cleaned the jets twice at this point and they didn't appear to be terribly dirty the second time around, I feel like I should atleast get a...
It ran alright but clearly had a pretty badly clogged carb as it had to be revved to like 5k to not stall out on starting, but the main jets were...
I've got an 84 VT250F presumably from Japan given the stickers that was quite clogged up when I got it, so I took apart the float bowls and...