New Member UK newbie

hi guys
im andy ive got a yamaha rd350 ypvs track bike in which im fitting a zxr 250 front and rear end
need some help identifying the forks i have for seals etc

 

my photobucket accounts has gone t%ts up like many others
working on a new provider

 

iive measured the fork tops.under the top yoke is 50mm further down near the slider is 51mm
slider is 41mm

 

putting this swingarm in with a tzr 125 4DL rear wheel

 

these forks

 

That rear wheel looks like it is off a zxr400, the zxr250a has 5 spokes and the c model is different again

Can you post some other pics of the forks including the top caps and the other side of the lower fork leg

 

its a tzr rear wheel


forks ive got




the front wheel hope they fit in the forks



top of forks

 

welcome.

 

That's all ZXR250 A model front bits

 

thanks linkin
are the standard calipers good enough for trackday riding
im used to 4 pot triumph calipers at the moment
i dont want to be running out of road

 

Wouldn't know, myself. I'm sure someone will chime in

 

i need the part numbers for both fork bushes and seals
ive tried a search here and can find nothing

andy

 

Inner bushing 44018-1054 Outer bushing (copper) 44065-1096.

 

thanks for the heads up
gotta pay £175 to have the legs rechromed first

andy

 

If you can get the dust seal out of the way you may be able to see the oil seal, which will have some codes on that you should be able to google - oil seals tend to come in standard sizes. I wouldn't recommend buying from Pyramid Parts as they'll likely send you some horrible single lipped jobbies, better to search out some lovely double lipped NOK seals - these are almost certainly what you'd get if you bought from Kawasaki (or whoever).