Project Bens GSX250 Cafe Project

Discussion in 'Your 250cc Projects' started by Ben Mulligan, Nov 14, 2013.

Page 18 of 18
  1. my67xr

    my67xr Bike Enthusiast Staff Member Premium Member Contributing Member

    Messages:
    4,313
    Likes Received:
    2,384
    Trophy Points:
    898
    Location:
    Adelaide, South Australia
    my67xr, Sep 21, 2016
    #341
  2. Linkin

    Linkin The Mechanic Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,741
    Likes Received:
    2,886
    Trophy Points:
    943
    Location:
    Sydney NSW
    If the bike is popping fuses you need to look at at the regulator and check the battery voltage when running the bike and revving it up. 13.6-13.8 volts is the sweet spot, any higher than that and you need a new regulator. Any less and you have some other electrical fault popping the fuse.

    My zeal would constantly pop the ignition fuse if the headlight was unplugged... then on my way to Sydney the battery died from overcharging (bulged and buckled) and all the bulbs on the bike popped, AND killed the tacho.
     
    Linkin, Sep 21, 2016
    #342
  3. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,931
    Likes Received:
    6,723
    Trophy Points:
    1,168
    Location:
    North by NW NSW Oztralia - Tamworth
    gsx.png gsx 2.png
     
    • Like Like x 1
    GreyImport, Jul 9, 2020
    #343
  4. Canada_Dry

    Canada_Dry Active Member Premium Member

    Messages:
    31
    Likes Received:
    15
    Trophy Points:
    178
    Location:
    Geelong, Victoria AU
    you found it!
     
    Canada_Dry, Jul 13, 2020
    #344
Page 18 of 18

Share This Page