After all that dicking around, I put a standard airbox on it (the last owner had put those poxy pods on it). It now runs beautifully! So,...
Re: Carby (what else!) issues and potential solve 1. Brought the bike - bike wouldn't rev past 8000, notice first cylinder (far left) not firing...
Hi all, My third carbie had fuel just leaking through it and into the cylinder- yuck. I pulled it apart (again) and this time noticed the...
Just one quick one for Cameleon - when you balance the carbs, are you using the screw that keeps all the butterflies synced up? Or the idle...
Re: Carby (what else!) issues and potential solve So I got these arsehole carbs back on today. The bike is running and sounds much better - BUT....
Re: Carby (what else!) issues and potential solve [img] So I took the float bowls, caps and diaphrams off all four carbies. Nothing different...
Re: Carby (what else!) issues and potential solve Thanks heaps. Turns out the previous owner has ruined the head of the screws in the carbie I...
Re: Carby (what else!) issues and potential solve Cool, I'll strip them and clean them today. I'm guessing the aerosol can of carbie cleaner is...
Re: Carby (what else!) issues and potential solve Your point of pedantry is very well received! Especially as when I pulled the manifolds the...
My little FZR 250 2KR seems to have a fuel starvation issue. Wont' rev past 10,000RPM when under load, sounds fluffy, and when I pull the leads...
This is exactly what's going on with my bike! Did you confirm that was the issue?
Separate names with a comma.