They should clean up nicely. Can you get threebond in over there? General purpose paint thinners and an old tooth brush also work well. Just make sure ALL passages are clear. The choke plunger nut on the left carb is broken, will have to be replaced otherwise will suck air in there. Don't over tighten them as the plastic strips easily.
Yip I'm gonna have to replace that plastic nut gonna give the local suzuki dealer a call the last time I enquired they had them in stock Sent from my SM-G925F using Tapatalk
Across very similar but with annoying differences,like crank .GJ starter motors are one offs and very very hard to find !!
I have std 30mm plus B and D model 32mm CV,s and the FCR,s.Running the 30 mm at moment as better of corner throttle response .but thats just fine tuning !
Nice, the 32's and 33's are used on the 400's so 30's should be plenty for a 250. I meant which bike can you do the better lap times on, the Balius or the ZXR?
tight tracks like Broadford I like the ZR and the ZXR for Phillip Island. FCR,s are 28mm as also used on the 400,s
Wow amazing so there is a direct swop but as you said might be expensive Sent from my SM-G925F using Tapatalk
Got the replacement nut thanx to a fellow subaru owner who collected the item for me Sent from my SM-G925F using Tapatalk