Ok...so after pulling the last few starnds of hair out...i beleive that after spending a fortune on carb rebuild kits....new cdi...new pick up coil...fuel tap..hose and everything else that could possibly be replaced....ive worked out that when my bike gets hot ...say 5 mins idling dies and wont restart....ita the bloody resistor spark caps that fail....the ends of the resistor and the spring receptical are dirty and looks like when they warm up must be arcing or something.......fortunately there is a local supplier of the full range of NGK products....surely theres nothing left that can be wrong....when it runs it runs perfect though...so thats a bonus....but infinity Ohms across the plug....not good ;-) Sent from my SM-G925I using Tapatalk
Have all of them failed ? Does it use 10 Ω cap's, if so the soft silicon one seem to seal out moisture a lot better than the Bakelite one's
Theyre 5k plugs....not sure where to get the nice soft ones...but ill just go the ngk ons i can get off the shelf...i need to get this pile of bolts running just for the sake of my sanity ! Sent from my SM-G925I using Tapatalk
I think from memory when I looked for new caps for my C model they were hard to come by ... the long soft ones Something like this ? I didnt check the specs but thats the style mine had http://www.gsparkplug.com/1x-ngk-resistor-spark-plug-cap-sd05fm-red-8673.html http://www.ngkpartfinder.co.uk/files/NGK_Spark_Plug_Covers.pdf do this also when u fit the new ones http://2fiftycc.com/index.php?threads/trim-your-spark-leads.8032/
Thanks for that....yeh im replacing the leads as well...hopefully my local supplier carries the full range of ngk..as they say they do on the website...NGK actually make an inline resistor carrier as well so you can use non resistor caps in any case...thanks for the links.... Sent from my SM-G925I using Tapatalk
Ok it lives again !! Got some caps from the wreckers.....some lead wire and itz alive......now for the leaky gear selector seal......ordered ....and some more waiting....... Sent from my SM-G925I using Tapatalk
Megazip supply new original spark plug caps. Got some myself recently. Sent from my HTC Desire 620 using Tapatalk
Cheers.....yeh im hoping these will be fine for now....bike runs mint now....amazing what $40 worth of rubber and wire can do for a bike.....doesnt miss a beat now. Sent from my SM-G925I using Tapatalk
https://www.megazip.net/zapchasti-d...791499/ignition-system-13885524#/il-325133002 Just caps, no leads Part no. 21130-1063 Sent from my HTC Desire 620 using Tapatalk
That one you linked. The cap, https://www.gsparkplug.com/1x-ngk-resistor-spark-plug-cap-sd05fm-red-8673.html Is that a compatible replacement for a zxr250a spark plug cap? My leads are in good condition, I'm replacing the plugs but the caps are a bit shot. I haven't found any replacement other than spending $150 USD on megazip.
Consider replacing them with ninja 300 coil on plug units, the wiring is simple you just need to buy the right connectors and make up a harness. I did it wit my ZXR.
Yes should be ... if u look closely on the cap it should have that number on it ... my old C model ones do This is the Green Spark Plug Company selling on ebay .... https://www.ebay.com.au/itm/4x-NGK-...949368?hash=item4b321784f8:g:paEAAOSwXCBaQ8g6 https://www.ebay.com.au/sch/i.html?...&_trksid=m570.l1313&_nkw=NGK+SD05FM+&_sacat=0