1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discussion Spada tail piece/seat

Discussion in 'Honda 250cc Twins' started by Gizziracer, Mar 21, 2021.

  1. Gizziracer

    Gizziracer Well-Known Member Premium Member Contributing Member

    Likes Received:
    Trophy Points:
    May 7, 2017
    My Bike:
    Honda vt 250 spada
    Recently completed spada resto came to me with this tail piece. I manufactured the seat pad. It seems to have been purpose built for this bike. The front bolt hole lines up perfectly with the fuel tank bolt and the recessed bolt holes on either side align exactly with the threaded holes in the frame that locate the original spada seat fairings. It even fits perfectly around the tail light. Does anyone know anything about a possible donor bike or bodywork manufacturer that may have produced a run of tail pieces for spadas.

    D4D13D76-CCA5-4DDD-B4EA-7B0C043942F1.jpeg EBF643B6-83AA-4456-9DFF-54EDDA5147EA.jpeg EC80DD40-7D8E-4B3F-8ED3-B8106A98092A.jpeg
    • Like Like x 1
    Last edited by a moderator: Mar 21, 2021

Share This Page