Separate names with a comma.
Hey guys, Im in need of some advice/help. I recently purchased an Mc22 which wasn't running at the time. The reason it wasn't running was the coil...
Problem has been fixed! New rectifier installed and now the battery is reading around 13.5 volts when the bikes running. Thanks for the suggestions!
quick update after changing the solenoid. Nothings changed still not charging while running. The voltage goes up slightly to 10.5v when i rev it...
So the new solenoid is in! I am yet to test it as i cant jump start the bike at the moment, here are the photos of the plug before and after ( I...
Thanks i got new terminals im going to try first but ill definitely be looking into the stator. My reg resistance was fine by what i could tell.
The problem was solved! thanks for everyone's suggestions. It turned out to be the carbs badly out of sync causing cyl 1 to be completely closed...
You wouldn't happen to have a link to a good guide would you? Ill search around a bit for information
i pulled the regulator wires and they looked fine, no visible burning or corrosion . I checked it with a multimeter and the resistance to each pin...
Hi so after a long period of my mc22 working at it should it decided to strand me today. Basically the battery went flat while riding and when i...
Thanks for the quick reply. I think i just worry too much :D
Hi ive noticed a ticking noise after start up on my cbr250rr mc22. After its all warmed up there isnt any noise. I think it could just be the oil...
You should really check the plugs they will tell you whats going on inside the cylinders. Sounds like a carby balance problem. Check my post...
Check your plugs and see if they are fouling up with fuel. My cbr was doing the exact same thing while holding speed, it turned out to be a carb...
Take a look at this butchered grom :idk: Each to their own i guess[ATTACH] [ATTACH] [ATTACH]
Thanks heaps i was wondering why i couldnt find any other lights like them
Hey so basically i have noticed that none of the other cbr250rr's out there have the same tail lights as mine. Im just looking for some info about...
BIG UPDATE: [Its a bit of a read but i thought i would get all the info i could into it for future forum browsers] To start off with I've tried...
My bad, it still is just the 1 cylinder. Force of habit to say plugs :oops: Ill be working on it tomorrow so ill give an update then.
Nice project. Looks awesome
Any ideas to test this?