Separate names with a comma.
SHE’S BACK FROM THE DEAD! Today I decided to go through a list of things to sort before calling in the Pro’s Fitted new starter soloniod Repair...
I believe the DVA I built early in the thread, works because I can see the .91+ volts from the pick up and when you remove the DVA you can see it...
About to check that but waiting for the post for the new soloniod as havevtaken the old one out, but will still Check the switches cheers
Hi mate, Yes thanks I have that and have been cross referencing between the original as I cannot read the wire colours yes mate I have that thanks
The part of the circuit I do not fully understand yet is; From the starter soloniod and it goes back to the bit I mentioned How when the starter...
Hi Tony, Yes it’s constant since kill switch plug an socket sorted
Hi mate, Sent the stator windings and pick up coil to a pro company and all checked out ok, same as my meter said but had to confirm The 12v is...
[ATTACH] [ATTACH] [ATTACH] I thought I would lighten this post up a bit as it’s me asking for some advice and nothing else So I thought I would...
[ATTACH] [ATTACH] I thought I would lighten this post up a bit as it’s me asking for some advice and nothing else So I thought I would post a pic...
The confirmation that there is no 120v for the coils to fire the 20,000 volts is confirmed by “Murdo’s” suggestion of using a timing light which I...
Yes I do why?
Yes I know this bikes 20+ years old but we can rebuild you I have also found an intermittent fault that was in the kill switch plug connect - now...
Today I have looked at why of where does the TCI get its signals Just an update The pick up coil and statorare fine these have been checked...
Your right it’s not a CDI it’s a TCI but no mater it still does not fire up
And on it goes.... I Have built a DVA or peak voltage adapter that appears to work, now here’s where I’m at, it would appear that I’m not...
There’s no colour as the plugs are new and they are the Iridium equivalent of the OEM, it cannot be the plugs as there is no spark, sorry there is...
Still waiting for parts to build a DVA peak voltage adapter so in the mean time thought I would check the stator/ alternator across the 3 pins got...
I will Check tomorrow, good idea about some of the excess off I’m currently ordering some bits to make up a peak voltage adaptor, to find out the...
Hi guys,, Here’s the update as of today Put the Reg round shims in today and there now all around .01 off mean or on Mean Put it all back...
Here the update Worked late last night taken the cams out and removed the relevant shims Shins ordered for tonorrow, and arranged for a local...