Separate names with a comma.
[ATTACH] The Zeal has been slowly trucking along. I have been finding it hard to get motivated to do much, as it’s so cold and dark after work...
The clutch seems to work OK now, but as the bike is on the stand i dont know if it will slip etc. The whole bike it getting torn down next to deal...
Another day, some more progress. In my last post I commented that whenever I put the Zeal into gear the engine would cut. Some awesome members...
Many thanks, I can confirm that the cable was badly out of adjustment on the engine end. It was hard up against the stop at its longest length. I...
Will check both tomorrow and report back. Sorry for the dumb question, this is my attempt at jumping head first into both motorcycle ownership...
Hey, Working on my Zeal recently and have discovered why my clutch lever is slack. The clutch arm isnt retracting enough to pull the cable...
Stand is up, but im wondering if the switch is sticky or something. Will have a look.
[ATTACH] I have been a tad lazy with the updates on this, but rest assured, progress is happening. Slowly but surely, most days after work I have...
Screws were ordered from http://www.boats.net/ PN 1HX-14565-00-00
Im also having a small (for now) issue with my clutch lever. The lever on the bars has too much play, and i found its because the cable isnt...
I also had some small bits just chilling in the bottom of the tub the tank was sitting on (to catch leaking liquid, which it did well), sitting in...
It’s taken a bit of working to get the motivation to write this post. Work on the bike has kinda slowed to a crawl, but I stripped the carbs and...
Who would've thought that bleeding a motorbikes brakes was so easy..... Its all just, right there (except the rear brake res, which is tucked up...
[ATTACH] What a week. Everything was put on hold, because I got married! But now that I’m home again, and going back to work tomorrow, I thought I...
Haha. Think that's a bit over kill. Will start with what I already have at home, white vinegar, and see what happens.
I have some white vinegar here actually. Might give that a try and see what happens. If it doesn't work, no harm done. Will grab that fuel pump too.
Hey, any reason i couldnt use a FZR250R fuel pump? Different part number to the one in the Zeal, but visually appears the same? I can get one for...
Since the Wellington train system can’t help but try to fall into the ocean each time there is some weather, I had some spare time today to do...
I have time, so i guess ill give electrolysis a shot. No harm, just need to find an old battery charger (as my ctek one needs feedback from a...
Thanks for the comments guys. The litetek carb kit is on my list of things to buy, for sure. He has a great writeup off redoing the carbs too....