Separate names with a comma.
The bike was booked in for registration today, but once again failed to start from cold. Only occasionally firing on 1 or 2 cylinders and farting...
Air box is fitted and Carbs are all balanced with a vacuum column gauge. Mixture screws are set 2-1/2 turns from their home position. There does...
Thanks for your input Cbuzz. We have an Across as well so there are certainly a few items that are interchangeable it seems (not the carbs...
Does anyone know if the voltage at the Left Hand coil is meant to be the same as the right hand one? With the tacho plugged in, I get 12v on the...
Funny you should say that Murdo'. I was tracing some unusual electrical reading through the wiring loom (I'm an electrician, so was keen to check...
1989 GSXR250 Grey import project:- Has anyone ever done a "what fits what" for interchangeable parts? It appears I may have a crook CDI module on...
We nailed it. Thanks Wozza for the direction, it was carburetor tune & balance. We figured that the noise changes with carb adjustments so we...
Haven't had the alternator cover off yet. Will check the area for things like clamps + clips rubbing as you suggested. Hadn't thought of that. Cheers
I can give that a go. My sons mobile phone take a pretty good video.
My son and I are working on a late 80's GSXR 250 project and have some engine noises that we need to track down. After a general tidy up, new oil...
Exhaust system fitted, and test ride indicates that lower end power has been sacrificed a little. Top end however is much improved with a 14500...
Some good information here guys. Thanks for the advice, I will go for the "suck it and see" method I think. Cheers, Graham.
Hi everyone. Just wondering if anyone has fitted a sports exhaust system to their 250 Across?? I am trying to adapt a "Bandit" exhaust system that...
Sure seems that way.
Bike now runs sweet. Idles as smooth as silk, and a quick test-ride around local streets was a success. Never having owned an Across before I'm...
Wow, 72k and still going. What is your maintenance regime? Oil changes, plugs, tune, shims etc. I didn't realize that long life was also a feature...
Now there's a tip! Thanks Greyimport. :thumb_ups:
I just sprayed some CRC around the intake boots and idle improved a fair bit. You might be onto something with intake leaks Bradley, I think we...
Carbs all balanced and air mixture screws at 1-1/2 turns from start. Bike runs but "hunts" up & down in revs. When hot, it will only fire up with...
I just downloaded a manual from the 250 forum after joining as a premium member. Now I have some good specs to help out might make some more...