Separate names with a comma.
Morning all. Looking for a MPH clock overlay for my 250c. Can't seem to find any about. Although I have found a 400L overlay that looks like it...
Tyga kit only fits model C/D. Sent from my SM-G920F using Tapatalk
With the Tyga kit you will have a modified rear subframe and no expansion tank. Also you need to find original lights front and back. And front...
On my a model, vacuum on 2+3 were connected to each other. Vacuum on 1+4 are linked and connected to petcock. Balance pipes on top of carbs run to...
OK, ordered a temp gauge. I know it's not definitive, but because the fan switch and temp gauge do seem to agree on engine temp, I'm fairly sure...
And the oil temp is probably more important than the water temp? Or is there a good reason to check the water temp instead?
You mean this sort of thing?...
Yeah, starting to think this bike is just a hot bike. Just that my other 2 zxr250s hardly ever got hot enough to need the fan. Fan comes on fine...
Water pump looks fine, so tested the flow. Put a litre of water in and started the engine with the red cap off. Water is flowing. Sent from my...
Anyone know what this highlighted part is? [ATTACH] It attaches to the back of the "bleed bolt", which isnt a bleed bolt on my engine. There is...
It shouldn't need pressure to bleed the coolant. Gravity alone would run the fluid through. Is this definitely a bleed point? Sent from my...
Yeah, rad cap was off so fluid should have flowed out of that bolt hole, if it is the bleed bolt. Fluid needed a slight top up, so running engine...
Actually, wouldn't matter if the thermostat was open or not. This bolt is lower than the radiator filler cap, so gravity alone would force any...
Is this something you've done? Sent from my SM-G920F using Tapatalk
It's going to difficult to get to that bolt with the engine hot and running... Sent from my SM-G920F using Tapatalk
Hmm, kind of makes sense it would be a bleed hole. No O-ring on mine. I even started the bike up to see if any coolant would come through. Anyone...
You sure that's the bleed? Took it completely out, but there's no sign of fluid of any kind behind it. Sent from my SM-G920F using Tapatalk
Wish I'd know that before putting airbox and tank back on! Sent from my SM-G920F using Tapatalk
Thanks. Will have a look once she cools down. Sent from my SM-G920F using Tapatalk
Used the one above waterpump. Never been able to find the one near thermostat. Does it look like a standard bleed nipple? Sent from my SM-G920F...
