Separate names with a comma.
Hi all - As FZR250 is winding down and being absorbed into this forum I have moved across to keep an eye on things. Thanks go to Chris for taking...
Relaxing Easter Saturday afternoon cruise up the Wilmot road. Selected sections from Forth to Moina. This is one of the main roads to world...
FZR 400 Manual This is the FZR 400 Manual which can be used for the FZR 250 as the bike is quite similar. FZR 400 Manual - Contents - 431.36 KB...
If you have a 3LN that idles but occasionally does not rev up when you open the throttle this may help. I have reprinted and edited a post from B...
I would like to wish all the members of the site a happy new year for 2012 It has been good to see all the new members who have joined this year....
PARTS - Yamaha Virago 250 parts may be more readily available in Australia if you are chasing parts... Here is a diagram of the BDS26 carb from...
<!-- m --><a class="postlink"...
Thanks to Efzedaah For this gem Well my bike has sounded like it has been 'missing' a bit recently, especially in rain, and I still had 1 spark...
Had an e-mail from a site owner who runs a discussion site for 250cc riders (not make specific). Seems to be lots of activity. If anyone is...
Went on the Tassie toy run last weekend and my son took some secret video while we were going up the Poatina road. You get to see me get a cramp...
I have involved with the local car club and got a job reporting that the cars made it past the finish line so the next car could start. Ended up...
I have copied this post from another website as it may be of interest for Victorian learners? Wow, if the 120 hrs of supervised riding to get a...
Any one for an electric bike? <!-- m --><a class="postlink" href="http://www.brammo.com/enertia-plus/">http://www.brammo.com/enertia-plus/</a><!--...
To Check the float level you only need a piece of clear tube that fits over the carb drain outlets.Then open the drain tap with a screwdriver. Get...
[img]
The 2KR uses a H4 lamp with the P45t base. The originals I believe are 35watt. You can see an example on page 6 of the Hella catalogue <!-- m...
Had an inquiry from an e-mail contact wanting a front wheel. This person is from CHILE so If any one is willing to sell to Chile let me know and I...
It applies to a 2KR caliper but it's pretty much the same for the 3LN's aswell, except for the retainer bolts....
I did change a fork seal on my 2KR but that was 2006, so you will have to take anything I write with a grain of salt. You won't have to do all...
From this site I have found a suitable means of lining up your back wheel... <!-- m --><a class="postlink"...