Separate names with a comma.
I'll give that a go this weekend. Cheers
The idle doesn't come down after a rev very quickly, it does linger a bit then fade back to 700rpm.
Charging system works great now. The battery was dead flat so I had it on a charger for a few hours... I'm STILL having fuel problems tho. I've...
[IMG][IMG]
It's revs up to 1650 but no further. I drilled the main jets out to help after putting the new exhaust system on. But I think I drilled a "wee"...
Yeah man I get some pics. It will be in the weekend because the bike isn't where I live... My workshop is on the other side of Auckland lol.
I vacuum syncd' my carbs using a domestic vacuum cleaner pulling air through the carb body with a vacuum gauge on the pipe (with carbs removed...
Just an update. I installed the mosfet regulator (YZF-R1 one) and it works perfect. It only uses 5 wires so you do have one (brown colour) wire...
thanks for the advice. from what I've tried it looks like the rectifier is dead. This brings me to the possibility of fitting one of a Yamaha R1...
I've got a strange problem with the charging system on my zxr. Firstly, it's a brand new Motobatt battery, the loom is complete and has never...
I was thinking of making something up from the standard fairing to follow the seat line... I'll cross that bridge later on.
It will sit on a different angle when it's mounted more correctly. I like the separation between the tail and the tank, reminds me of the 250 GP...
Had a zx9r race seat kicking around in the workshop so I tried fitting to the 250, it's an easy fit, I'll need to cut/weld the lower bar of the...
I was told it was zxr 400r but the lower linkage was different. I did have to make a new lower linkage using the standard one as a donor and weld...
Just fitted a fully adjustable shock. [IMG]
Its a genuine Japanese unit... I actually thaught only the 93+ bikes were restricted? ... I'll give it a go and see if there is any noticeable...
Thanks. It will get its faring kit back on when I'm happy with how it's running. It's idle I is up around 4000 rpm so I need to pull the carbs of...
Hi, just want to leave a post and say hello to everyone. I've been busy with building up a very fresh zxr 250C , Ive had both an A1 and A2 in the...