Separate names with a comma.
Kiffsta, I just searched for the CDI number you posted and it appears to be for a year 2000 EX250 Ninja. Maybe their not as model specific as I...
Im not sure, bear in mind that I am in New Zealand so maybe I could find someone over here. In saying that I cant imagine it costing less than the...
Okay. I had to take some time off from working on the bike to sort out my car problems (Aint life grand :D). Anyway last night I decided to test...
Hmmm sounds important!
Anyone care to explain what it does. Just been searching for an explanation of what it does but can't find anything.
Thanks Wade that would be great. Yeah 1 coil for 1&4 and another coil for 2&3. Just had a look at the bike again, cannot locate the vacuum valve...
yes plug wires are on correctly.
Thanks for the diagram. I cant seem to locate the vacuum valve anywhere on my bike. It's very odd plugging and unplugging the hose from the carbs...
Just finished reinstalling the carbs, priming them and testing the coils as per the zxr 250C manual i download. the coils are within spec, float...
Just finished stripping, cleaning and reassembling the carbs, i didn't find anything abnormal so i'll have to see how it goes tomorrow. Also going...
Giving it some starting fluid just makes it burble momentarily. I will look into the coils (and a method of testing them properly) as well as...
When it died it just kind of lost power over 10 or so seconds then stopped. I've tried charging the battery and even a brand new battery. All...
yes ive tried with and without choke
Just checked the pilot screws, they were all set differently so i returned them to 2.5 turns out but it didn't make a difference. A bit stuck now...
I will check the pilot screws today, the stock setting is 2.5 turns out from fully in correct?
yeah ive tried with the tank off completely so no petcock, just trying to make it drink from a fuel can. No change
yes it ran but then just died while i was riding it the other day. Despite all the cranking involved in trying to get it to start it didn't flood,...
Yes the fuel tap has PRI i tried using it to fill the float bowls (left it on prime for 2 mins), also tried starting it on PRI but to no avail....
Hi I am a new member and have just bought my first bike. It's a 1994 Balius ZR250 (ZXR250C engine I believe). Anyway im trying to get it going....