Separate names with a comma.
Ended up bypassing the side stand switch. Neutral light works OK and buzzed out at the sensor, side stand switch also buzzed out OK. So not sure....
Great I'll check this tonight after work and let you know!
Anyone have one or can ship? Ta.
Hi, on my rebuit Zxr250a it seems to run OK but if you put the side stand down in neutral the engine misfires and eventually dies. I've buzzed...
Yes, umm 17mm rings a bell?
Cool. Will do
Thanks. Yes, no notches/clips on needles but I could try shimming for better midrange if this would help . Pilot screws are standard (2.5 out I...
Hi, the bike starts and runs OK but midrange is fluffy and it flooded on me today at a junction (had to wait 10mins before it'd go) Any ideas?...
Sorted. Fitted the one recommended above. Works a treat thanks.
It works with clip bypassing the switch so not fuse. Looks like right ebay link thanks. Do you know if 110oC is correct ?
Hi, does anyone know around what temperature gauge position the fan normally kicks in on an A model ? Mine goes into the red without turning on...
Thanks. You're right about the graphics..not sure if to get it running and leave them or to sort it. I've got a few other projects on the go so...
Bike is now all back together. I've tried to get a couple of pics but struggling to show the metallic paint in a photo. When the sun catches it...
Got bodywork back, looks awesome! I went for Golden Blazed Green, same as on ZZR1400, and the speckles really shine in the sun. No pics yet as I...
I've not seen them in 140 18" in UK.
Ordered tyres .The only rear 18" 140 in UK widely available seemed to be a BT50. So went for this and a BT016 Pro front. The bike has a 120 front...
Good find. Likely to be the camchain.
I decided to have the tank professionally welded in the end. Then I used POR-15 to seal it. Good stuff, it's a 3 stage process so quite time...
Hi John, where are you in Uk? I'm near Leicester and have an a-model. Got a few spare bits
Good work. They're still very easy going on the UK when it comes to bike noise. As long as it has an exhaust then the majority of testers don't...