Separate names with a comma.
great video... when they manufacture the mass produced garbage we all own ;) they machine measure, its why cranks have sizes stamped, and bearings...
do you want to part with the dud engine separate... if so, pm me
There's plenty of state of the art engineers in AU, even here in Newcastle, I use a mob called HB sales, I gave him the new os pistons and rings,...
I did this really strange thing today... I rode my bike... ;)
that's a big no no @risky :mad: it will dry out the seals... flushing through fresh brake fluid is all the system needs... (hate bad advise)
@siwilson from your pictures, the spider has a groove on the inside, does that line up with a dowel or machined woodruff on the stator, the gap is...
either way @TechHeadFred only one small part of that stator is critical to spark... the majority of it is generating voltage to charge the battery...
I wonder what laser honing would cost... with most 4 cylinder 250's, it may be cost effective, we're talking about an 18000 rpm engine...
Yamaha use a separate pick up... the stator output has nothing to do with spark production, only the pick up built into the stator in Honda's...
just on cleaning the bore, as a tradesman I have always used Prepsol, I fail to see how a lubricant will clean better than a solvent designed to...
most nipples use a 1/4 inch ID hose...
the valve spring compressor would only be used if the cylinder head is off, I don't think I've ever had to remove a cylinder head in my life to do...
is the pick up coil for the spark part of the stator... way to go honda... :( do you have all the original parts, if so, put it all back together...
you can use DOT 4 brake fluid where DOT 3 is recommended, just don't go the other way... Brake Fluid is hygroscopic, it absorbs moisture from the...
why would you insult ham sandwiches??? ;) great news though...
After much chasing around for parts, including ordering a genuine bearing at $65 au... I'll start with the output shaft assembly [ATTACH]...
my bike is tuned to E;) I synchronised my carburetors to E, that is, using an E string off a steel string guitar, its used as a 0.1 mm feeler...
bwahahahaha... yeah... ok... :headbang: I typed in english, fuel level, float level, fuel height and none of these translated to 油面高さ because it...
I thought I'd give google translate a workout... time consuming on a touch-pad mouse but you can draw in Japanese characters... [ATTACH] down the...
well Sunday I finally got to put a manometer on the 3LN1... carbs balanced, idle set, and mixtures... not exactly pleasant riding weather round...