Separate names with a comma.
thanks for the reply greyimport
pm sent
hi, are you still doing the Vibratory Polishing in brisbane ? email at nrodpw@internode.on.net thanks josh
email me at nrodpw@internode.on.net
this it ? [ATTACH]
i have a recently blown engine that i don't need, crank would need a linish on one journal, barrel is good, head has oil starved cam journals,...
the shift springs/lever and the star shaped piece appear to be moving and working - i wouldnt know what it would look like if it wasnt working...
bit of an update clutch basket fingers had notches, so smoothed them all out, i also changed the entire shift rod seeing as i had a spare 3ln3...
so re positioned the pedal as per Greyimport photo, can 100% confirm it will only go into neutral with engine off - can literally use my finger...
thanks for the tips, will adjust that linkage position - have attached a photo of it currently. Will also give all the moving parts some lube...
hi all recently swapped a 3ln1 motor int a 3ln3 frame, everything runs fine except the difference between the oil level sensors and oil pressure...
i probably have one from a recently blown motor 3ln3 in Queensland Australia