Separate names with a comma.
Ok,thanks.
I have cut my stock fork springs and installed them with the long PVC spacer,plus I added about 20cc more 15wt. fork oil. I like how it's...
Yes,it's just a small pinhole. I think the rest of the diaphragm will flex around it and at least the slide will be sealed;I hope it will stay-put...
I imagine it cures hard so just a small pinhole amount of it could possibly be tolerated on a flexible rubber diaphragm?
Rubber cement? it's an idea & may be possible;am hoping to see if something is impervious to gasoline.
I have a pin hole in my 83' Suzuki GS750ES(this one isn't 250cc,sorry)Mikuni carb slide diaphragm and wondered if anyone would recommend a...
Excellent explanation,thanks Danno :thumb_ups:
I didn't check but vaguely remember the springs were just down a few threads inside. Thanks for that info on those 32lb/in. Those springs would...
Danno,I also just found a pair of "adult rate" fork springs manufactured here in OK. USA by a company called Performance Spring,inc. This set of...
I just today had them cut and the cut end shaped/tapered by a metal worker with a smal(3"?)one-hand air powered cut-off wheel;this worker did it...
I'm going for it;thanks Danno. :thumb_ups:
Danno,when you say "softer coils",are those the close-wound coils on one end of the springs which I'll be cutting off ? I like giving myself a...
The measured progressive rate on my stock springs are: .28-.34kg. I would like to change it to .45-.52kg. This is the progressive rate that I...
Danno,I see what you mean on how to cut the springs with the illustrations(they help)and info. How do I calculate what spring-rate I arrive at and...
I weigh 225 lbs. now and might carry a lightweight passenger very rarely. I would like to be able to load the bike up to the 325lb rated carrying...
This is my stock(17.70mm O.D. x 18"/457mm Long)OEM spring.There are 6mm between coils at the widest and the wire diameter is 2.95mm. I shortened...
I understand,agreed. I imagine I could also use clutch springs as preload? My fork springs O.D. being 17.70mm may be similar to clutch springs.. I...
Danno,that is an option. I'm looking online for a heavy duty 17.50+mm O.D. pair of aftermarket front fork springs for the Honda CG125 which uses...
Hello Danno, I found a place in Oklahoma City,OK. called Cannon Racecraft which sells springs of different sizes and makes custom springs for...
These 2 calipers are a CB350F hydraulic caliper on the left and a caliper body just like mine(CB125S)on the right. The CB350F caliper has the back...