Separate names with a comma.
Thanks guys I found them plugged with screws. All good now to see if it will run. Thanks again
I am rebuilding a Honda VT250 after it catching fire and it has a vacuum petcock. But I cant see where the vacuum hose can connect to the inlet...
ANy place I can get a service manual for my CBR 250RR?
Is it correct that With NGK resistor caps resistor plugs should not be used as the spark is greatly reduced? If so what is the non resistor...
I am looking for an original OEM muffler for my ZXR 250 to pass a RWC in Victoria. Seems ridiculous but they insist. Has anybody had this experience?
Thanks I did discover that the oil was coming down from the cam cover o rings which I replaced Nd problem solved Cheers
Thanks guys that solves the mystery for me.
Hi I have just discovered after acrebore of my ZXR250A that oil is dripping from 4 holes above each exhaust . Can anybody tell me what is the...
Hey guys can anyone confirm whether the longer buckets on a GSX250f are on export side?
Thanks Ill run the checks tomorrow but my feeling is the CDIs could be dodgy as there is good spark. Anyway lets see. thanks bud
Hey guys I have a VT250 F 19882 which I am trying to get to start after putting 2 bikes to make one and now it wont start . Has spark and fuel. I...
Yeah finally spotted it. Cheers
Ok thanks. Do you know if C model pistons fit an A model?
Did anything come from this as I would sign up for an oversize set.
Thanks bud yep found the short stud in the chain well on the side down where the head joins the barrels. Got the head off and note that it has...
hey guys I am in the process of removing the cyclinder head off the ZXR and I am stuck because I have removed the cams etc etc and all the studs...
Hi guys, Im struggling with my ZXR rebuild. If its not one thing its another, but it will work out in the end. Today I need to know how to...
Thanks a million. Any idea where to find a head gasket? Not sure if I need a piston yet but there is ZERO compression on one cylinder but yet to...
greatly appreciate it but I have the tube just need the correct ends
Yep pretty crazy system. Made to leak.