Separate names with a comma.
I should give a heads up after finally get back to this. The kawasaki bolts do not fit. They wont slide into the conrods, ie slightly too wide....
I have a FZR250 engine that is apart. Unfortunately due to an accident while in storage in my car boot, the deck was bumping on the edge of an...
ok, getting back to this. If you are happy to organise a joint order, l can paypal you. But then you'll need to ship my order to my address (im...
Below is my understanding of whats its going to look like. As per your measurements the yellow shape is slightly wider than the 12.5mm line you...
Ah right, I see what you mean. I kept thinking I should grind the bolt head, not the rod itself. Im on the verge of giving up so if this...
When I said someone I meant either you and ruckus (who presumably has also ordered the bolt). And sorry didnt know you actually did the drawing....
While the bolts can turn alittle, we are talking about a completely different shape. The shape of the Kawasaki bolt is a rounded rectangle, while...
So how are you going to deal with the fact that the bolt head wont fit? One glance and I can tell the squarish head of the kawasaki wont fit.
Whats the point? MC19 bolts are not made anymore.
8 week backorder. Last time I waited that long for the Honda bolt (earlier this thread) only to be told by the Coastal motorcycle Center that the...
I ain't gambling $130+ on that. Already wasted money trying fzr400 and now Honda VFR/CB 400 bolts. Happy to wait for someone else to take the...
Don't bother, found a local seller, got one and just measured it, its a 7mm bolt. Even tried shoving it into the conrod and it wont even go in....
If you've ordered a sample, whats the ETA? Impex stocks it as well
before i order, have you even measured these? Just because theyre on several models means jack all for a Yamaha engine
Tried Impex, just got order cancelled, again saying out of production. I'm not going to bother more at this stage, if one engine blows I have the...
Tried ordering mc22 conrod bolts (13213-KAZ-003) , after weeks of waiting, they've only just now told me they're discontinued due to covid. What...
OAL of the FZR250 is about 40. With the slightly smaller bolt head and everything else being right, should these fit the bill? Can an engine...
below are approx. as i'm using a cheap caliper (in milimetres): outer threaded diameter = 5.85 shank diam=5.95 shorter diam of bolt head = 10.7...
25G-11654-00's head shape is off - the FZR250 is a narrower oval with a shorter 'straight edge'. Although if its 6mm and the right shank, can one...
Well the FZR400 ones dont fit. They appear to be 7mm thread and different shank diameter too. The FZR250 bolts are likely TTY. I cant believe...
