Separate names with a comma.
The quote was from him.5 bucks a pop.
Shipping time for new valve shims is 15 business days... No one in NZ stocks 1.70mm. need 8 of them. Put the old ones back in for now. With the...
Stock spec Intake: 0.15 ~ 0.24mm Exhaust: 0.20 ~ 0.29mm in#1: 0.14mm in#2: 0.18mm ex#1: 0.23mm ex#2: 0.20mm in#3: 0.15mm in#4: 0.15mm ex#3:...
Morning all Got the black zxr running, but not nicely. Sounds as if it's on 3 cylinders for the most part, then for a second or two it runs on 4....
[ATTACH]
Yes, I do, thank you! Update re limiter: 10k ohm resistor spliced between pink TCI wire and frame fixed the issue. Revs to 19k now. Thanks for...
Wow, interesting. I thought they would the same as the hondas, with late model mc22(R) being the restricted ones. That's what I get for assuming....
Ordered new clutch friction plates from impex japan + some "heavy duty" springs. Still having trouble getting it to rev past 16k. I put a '92...
Hi everyone, thanks for all the good wishes. Grey, the overflow bottle is just ziptied onto the radiator . Someone removed some fins and ran the...
Yeah, It's brand new. I got a real bargain for them so I couldn't turn them down. The black tyga kit is really good, too. The tank cover is inside...
Picked up 3 ZXRs today. The green one is at 38k km, the middle at ~100k, and the one on the right at 48k km. I will test the oil pressure and...
Just another question... I used cmsnl for my MC22 and NSR projects, but it seems they don't have parts for the ZXR250? Xcite doesn't stock...
Thanks all! Will keep you posted
Hi All, Picking up my '92 ZXR250 this weekend. Will need a full rebuild, she's done 100k km with many learner owners. My query: anything...
bad coil meals 2/3 would both drop out. Maybe just the HT lead needs rethreading. Let's hope. Or the plug's carked it.
Thanks, Murdo. The crankcase has severe pitting all over on the outside, up to 3mm deep in some areas. It would need building up with a welder...
That's all there is for now. I have been able to find all the parts I need, but not the money to buy them ;) What I need: Tank Crankcase...
The crankcase and crankshaft on the other hand... definitely need replacing I think the crankshaft might be salvageable, but it will cost at least...
The engine only has 19k km on the clock. Fortunately the gearbox was full of oil, so it's still in good condition. The cylinders and pistons look...
I have my work cut out. Here's some more pics of the teardown. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]