Separate names with a comma.
Is this a legitimate component and will I be able to plug it in to the existing wiring. Also is there a English site?
Okay, I'm back gentlemen Recently I had restarted the fzr fix, as we know the misfire problem only happens a 13000rpm and above. The mechanic I...
Can't see your image for some reason, anyone know where I can get a new one?
Ok, starting to suspect float heights now, the manual say 9.2mm but where am I measuring that from, do I need a tube and attach it to the fuel...
My tci isn't like that, it's got loads of clip connections rather than those insert holes and the components are in different positions, I'll take...
I've checked the pick up, ignition coils, spark plug caps and tci .all have correct resistance readings. not sure where to go next
Couldn't find a post to fix the tci, had a look but can't seem to remove the circuit board without completely breaking box, I can remove the front...
Carbs are set to this apart from the needles but they were at the factory setting and it was way too rich, plugs gapped to 0.70 and I've get new...
I translated the Yamaha manual to English as I speak Japanese and the main jets for 1&4 are 102.5 and 2&3 are 100. When we dynod it the needles...
Exup valve is set up perfectly and operates as expected when reving, opens little by little ect. The misfire was found whilst dynoing it still...
The bike has severe misfires above 12 thousand rpm, I've get new spark plugs and new could, cleaned the pick up points on the rotor, can't see any...