Separate names with a comma.
The reason I ask is because my front cylinder came with a non original 90 degree NGK 5K cap, so it doesn't snug into the head like the original...
Do the original Spada plug caps have a 5K resistor? The recommended plugs are 5K resistor so I would think not.
[ATTACH] Well my box of teeny o rings arrived and they are teeny! Way too small to use on the mixture screw so I stuffed in the smallest o rings...
I screwed both needles in at the same time and still got nothing. Then pulled the carbs again and checked the float levels. One was just under 7mm...
Thankyou I'll see how I go.
Thanks my67xr for the cool tool pics. I put the carbs back on this morning even though only one of the new manifold rubbers turned up. I mentioned...
I remember Mentor's Wayne Gardner stand... you'd see it as you drove through Leichhardt into the city. Win it Wayne! My build number is 1000502....
Thanks for the link I've been using that method for years! The reason I originally posted was because I'd not seen an unslotted mixture screw...
Thankyou I'll try it today.
Wow that was fast!
[ATTACH]2020-02-04 002 by Andrew Dixon, on Flickr Hope this works
Damn the pic didn't work. Help here?
[IMG] Hi there I've had this bike for two months it was rough when I got it but gradually getting it sorted out. I'm chasing hanging throttle......
