Separate names with a comma.
That is what im doing. I went around all the local shops here in Rotorua none of them even had a stone small enough to grind these tiny...
Ok got that apart the mains look fine to me all things considered. Anyway I dropped it off to a machine shop to see if they can polish that rod...
Yep it takes a surprising amount of force to move that thing for what is....
Ok thats where I went wrong I tried with a normal bolt (grade 10.9) though. It had a tapper on the end of it already so I figured give it a go....
Now that I look at the flywheel again the keyed boss that holds it on has a massive thread in it compared to the nut that actually holds it on but...
OK whats the best method to remove the timing wheel/flywheel as it looks to me thats got to come off to split the crankcase halfs? I have removed...
The original overheated (spun) C stamp rod.... I do wonder weather I should look into reusing this. Its straw brown in colour sure thats hot....
Thats what I thought when I saw them they looked like they've been cast out of the same mold as yamaha originals. They are pretty cheap so I...
Hmm even just looking at the rod thats in there now in the same position as the rod that was cooked. I can see almost blue nuts on it compared...
Ok sweet im going to have to look very closely at that rod journal that had the ****** rod on it obviously... Im thinking im just going to have...
Guess I have now jumped out of the frying pan into the fire. I bought a second hand motor all honed and decked sort of ready to assemble....
The picture on the coil measuring page has the multimeter leads into each coil ignition lead (two per coil)... Which is 15k. I have my leads...
Anyway the rings are farked I reckon. I just read some other search results on compression testing it. So im better to take the carbs off and...
You arent times the spark plug caps by two though? I had both spark plug boots on not one. So thats 35k. I get what your saying about the...
The previous owner claimed he replaced them (there were old plugs in a box). Anyway I just went and bought another set and replaced 3 and 4....
Ok fair enough I realize all that I never bought it for commuting its just a one off project I thought I would try tackle. I cant spend every...
Is it possible to have a problem with one carb where even when you screw the pilot screw right in nothing happens? I find that odd. Is that a...
I do wonder a bit about why they went twin turbo. Seems to me thats just another 20kg of weight and expense they dont really need. Cant argue...
Edit: realized the above pic is not the land speed bike as the turbo is mounted different so unless its some weird blow through carb setup it must...
So who's going to be the first to do this to a street bike? Turbo's and fuel injection are something im more familiar with. But not on bikes....