Separate names with a comma.
Who makes a race fairing for the FZR250?
Having the 1 1/4 SU's is a very good reason for using them. Talking to Justin Newell (He has just rebuilt Little David) the other day and he is...
A single 2" SU will give you the same area/Airflow as four 26mm carbs.
If you have available parking, cant you get an old van and use it as a garage.
You should follow him on facebook and read about his V10 viper bike, V twin built from a radial engine, v twin honda 100cc, V12 Kwaker, straight 5...
I believe Allen is an expert with a hacksaw and files, he cuts and welds two engines to make one.
Look up Allen Millyard on facebook
Does the fuel pump work?
This is using about 16k off the line and shifting at about 17k
Yes it does not leak any oil now(even when running 14sec quarters). I made the gasket as the originals are not available in the UK. A sheet of...
Scitsu Tacho, alloy rear sprocket made by Talon and Boyer ignition with custom mount.
An aircooled engine is not going to produce the same BHP as the water cooled version. This is my Bob Farnham stage 3 bike using Lectron carbs....
Have a look at this thread, includes info on new coils and plug caps
I moved from a flat to a house with 1000sq ft of workshop space. The workshop is now so full I cannot tread on the floor, I have to climb everywhere.
I would buy new bleed nipples but cannot find what size to order
No resistance at all when operating the brake lever, and if I pump with the valve open the fluid in the drain tube doesn't move. Tried three...
When I bought my FZR250 3LN1 one of the threads had gone on my front brake master cylinder so I decided to replace it and never checked if the...