Separate names with a comma.
Lodge a compliant here , PayPal have to respond in a timely manner or they get fined large sums of money
I am closing down MotoREcycle in March, appreciate you guys tagging me for parts but I am in the middle of clearing everything outthen going and...
Sorry I don’t have one , the last good one I had is on my own Mc22
cheers, I have coils, it is the leads I want to bring it back to a stock look
All stripped down and ready to paint the frame , swingarm and wheels
whil that is being done , I will start cleaning up parts with the vapour...
Chrome is gone ,they are a bit beyond salvation
I also need :
Swingarm , I have 3 but all are
Buzz should look like this once done , as I have this tank
Forks are shot, does anyone have a set ?
A while back @ShaneP dropped off to me Buzz , his 1992 Kawasaki zxr250c ,
Some of you who came in the Texas ride
Would know buzz as the zxr250...
For those playing at home , I pulled the head off the mc22 to replace the gasket and noted that one of the head bolts between 2 and 3 was a bit...
I bow to your awesomeness @mboddy , I knew benelli did some exotics , but not a 250 4 , thanks for the heads up
The bike that started it all , the first 4cylinder 250 - 1984 gs250fw
Engine number runs along the bottom of the engine , find the bottom of the clutch cover then peek underneath
that is the wrong sprocket for your...
Engine number is underneath the clutch cover
Overflow bottle is fine , alas looks like a head gasket as there are bubbles in the radiator when I rev it .. sigh.
Oh well , the joys of...
Carb cleaner , threebond. , just needs to soak to free it up
Check out the last paragraph on this page
Heading to the coast to have a look at the Gold Coast car and bike show and my little mc22 developed a coolant leak , suspected cracked over flow...
Looks is great nick mate , I get plenty of Bikes in with seized caps , I usually spray some wd40 down the lock and around it , let it sit for 20...