Separate names with a comma.
Nice - I've got a fellow student at TAFE who has a TV250 Wolf.
Sticky Pirelli goodness... the rep from LINK international got me a cracking deal as well... guess how much I paid :)
All that fuel has probably made its way into the sump, you should replace the oil and filter. The fact it leaked out tells that the needle valves...
Keyster kits from motorcycle spares warehouse.
You need to identify what your carbs are (3LN1 or 3LN3/5 or 3LN6/7) and order the corresponding...
Good. Got some sticky Pirelli's coming and then I'm all set for the track on the 15th.
the system arrived the other day so I got busy after work...
No cat at all, so I chose to leave the baffle in. I will be wearing my...
I'd say that the 110/70 will be fine particularly with modern rubber, just get something on the rear to match.
Not sure I'll let you know when it arrives.
Got myself a treat for the MT09 :) Delkevic titanium full system. Boss gets a 20% discount from retail ($800) so I will get a good price on it....
The timing marks are the small dot on the cam (not the large hole in the round section) and the matching protrusion on the cam cap.
Okay. I can see in your pics that the cam chain is not sitting on the sprockets properly. Try turning the crank slightly forward and backwards...
Can you post a picture of the crankshaft timing mark when the cams are in the positions pictured
I'm booked for the 15th of august at eastern creek with the MT09SP. Looking forward to it!
Roadworks, rain, and lazyness mean living up to my membership in the dirty wheel club.
With the camshafts removed, all the valves are closed and there is no danger of valve to piston contact.
Today I fitted a set of Whites power sports heated grips, they're better than the oxfords because there is no separate controller box, it's all...
Try a heat gun as you are fitting them, unless they have shrunk too much.
New ones make all the difference, the airbox just literally pops onto...