Separate names with a comma.
Have made and mounted the oil tank under the engine.
Used a piece of 6mm alloy for the base and extended rearward to mount the oil pump with a...
One too many '0's on that one.
Bought some spokes from Lightfoot about 10 years ago and were costly (stainless) but good quality and spot on fit.
Have been using the Thailand...
Check also that the pull cable is properly fitted in the groove around the holder on the carbs.
What about give these blokes a ring.
Front part number,
Cut and paste those numbers into google and see what comes up.
There is plenty of Virago bits on Aliexpress.
But not much for Suzuki....
Welcome. Nice bike and a bit rare too. Enjoy it.
I've used a few sets from this bloke in Thailand....
Went for another 90Km run with my son, grandson and friend on MC-19 today and still running sweet.
I actually said a lot more than that but that is the nice version. :lolsign:
My first thoughts are too rich on idle mixture screw or the bowl is flooding. Try leaning the idle mixture and see if it improves.
Out with my XL again to help another member with his XL. Took the back dirt roads to Manilla, across to Somerton on the Klori stock route, and...
Back together with new gasket, fresh coolant and carb balance. Took for a 100Km ride today and home with no loss of fluids. Happy. :)
A sad end to someone's DT250. And that is a standard Yamaha cylinder head too.
Didn't know you ran sheep up there. :lolsign:
(A fluke is a type of internal parasite in sheep, mainly in the liver.)
Dunno, give them a ring.
(02) 6040 9955
What about English Hagon, Progressive or YSS shocks?
:thumb_ups: for Ikon. Have them on three bikes.
I had a small tin of Motul that I used on my last long trip and was not impressed with it. Ran out on the last day and I bought a tin of Castrol...