my bike came without the exup connected so i just used to roll it on to closed (the deeper sound)wich i found much more imresive in low speeds but if i stoped to hard or to fast it would roll open which was anoying so i ended up geting some cables and re connected it and it doesnt do anything its just like open all the time and im thinking of takeing it bak off and some how wireing it to fully closed so i get heaps of back presure but can someone tell me y it woulnd b working as well? with it conecetd?
Does your EXUP motor (with cables disconnected) rotate clockwise (think thats the right way) and back again when you turn on the ignition?? The EXUP valve is closed when it is rotated anti-clockwise (looking from the gear-change side) and open when clockwise. Make sure the cables are pulling the correct direction.
yip it goes clockwise when you turn it on resting its self or something? and i read that it moves from 4000rev to 10000 so i took the side cover off and tried it and it does move but not hugely like when it rests its self? i think is most likely to be the clutch sliping still saveing for the clutch kit