ok so just bolted up the yzf750r master cylinder to the clipon two things i found the m/c first hose from the splitter wont reach so will get one made up thats longer and has no 90 bend in the banjo's second the reservoir bracket doesnt fit anywhere so im thinking of ditching that and making up something to bolt off the clipon / m-c cap or i could just use a longer pipe from the reservior / m-c and bend it round to bolt up anyone got any thoughts ive seen the fzr400sp has a different yoke setup so thats out of the ball park will get some pics in a bit
and heres the rear caliper and m-c all fresh in 3 coats of acrylic enamel and 2 coats of lacquer with new piston seals ready for new pads
heres the solution to the reservoir bracket using a stainless connector nut and some epoxy metal molded
