Hey I have a 1991 ZXR250D with saggy rear end. I think I like to buy an aftermarket shock before I refurbish the one I have. I got this information from my supplier after he was digging a bit. There is no listing of my bike any places for shops here in Norway. Have anyone tried or have information if this will work on a 1991 model ? I believe it is quite similar measurents for C and D. but D have the extra Nitrogen bottle. Thanks Erik
Checked YSS Australia and this is the listing they have, showing remote reservoir. The shock is YSS MX366 https://yssaustralia.com.au/road-mo...onoshockweight-75_95kg/455-monoshockcolor-red
Thanks for quick reply Yes I have read this post but he do not tell if it is this shock or another. He only said "well I finally found a shock" In my mind this might be that the one suggested did not fit and he found another.
Hello Erik, I'm the guy who has fitted a NEW YSS shock to my 1991 ZXR250C. The shock I got was as follows: Yss model # ME302-280t-11-X. Hope this helps you. Only mod I had to do was skim the top spacer of the shock to fit in between the mounting point. Good luck on your project. Leslie