Painted some of the c models fairings today finally . Came out pretty good . Colour matched kawasaki green basecoat with 2k clear in a can ontop. Bit of dust in it from being painted outside but eh it's not perfect anyway . Surprised how good it looks considering some parts were destroyed. P.S they're loosely fitted hence the crappy panel gaps Sent from my SM-N960F using Tapatalk
Got the exhaust in the mail today . As I suspected the end of the headers need to be cut down...not too thrilled... Sent from my SM-N960F using Tapatalk
The A and C models are slightly different, right? I forget how they differ, but I'm sure the muffler mounts on that protrusion differ. Might be the issue with yours?
Nah they're all the same . Have 4 sets of headers off A and c and they're the same. Sent from my SM-N960F using Tapatalk
So I ended up cutting down the exhaust and fitted the new muffler . Sounds pretty nice! Sent from my SM-N960F using Tapatalk
But it sounds beautiful I love you for all your work. It looks amazing and certainly gives you a lot of satisfaction
Yes, I'm confused. The one with 4 pot calipers on the front is the perfect one and the other one is supposed to be a paddock bike but Tony got carried away
So I manage to use my cousins sandblaster cabinet yesterday. After much degreasing I blasted the A models original engine casings and a bunch of other aluminium parts . I then switched the garnet over to a glass bead and blasted it at low pressure . As you can see they look like the day they were made Before After sand After glass Sent from my SM-N960F using Tapatalk
Looks good. I just had my lower case vapour blasted and I prepped by using aluminium tape and silicone plugs. I will post a pic next week.
Yea probably shouldve masked it off aswell... Hopefully i can wash the oil galleries well enough. Amazing how resistant the parts are to staining after glass bead blasting Sent from my SM-N960F using Tapatalk
Ended up painting the tank . After looking at the paint peeling , rust spots and dents I couldn't live with it (always happens right) got some new stickers made for it , fixed the rust spots and pulled out the 8 dents around the filler cap and one on the side. Cleared over the stickers so they're never coming off haha Sent from my SM-N960F using Tapatalk
So I've got both side fairings painted and loosely assembled . Starting to look the part now! (Bikini piece not shown) Sent from my SM-N960F using Tapatalk
Kawasaki is running downhill, instead of parrallel to the lower white line, Kawasaki script is a bit too big too ?
But, if I am correct, this is just the paddock bike and it looks great. The crème de la crème is lurking somewhere else. Speaking of which you better run some detergent and a high pressure water blaster through those cases Tony, just to be sure.