Finding parts for ZXR's can be challenging at best, I recently bought this Caliper Rebuild kit from the UK on eBay and it worked a treat, included in the kit is : 2x 24mm pressure seal 2x 24mm dust seal Rubber slide rod gaiter Rubber slide rod boot 7mm bleed nipple Dust cap 2 copper banjo washers As the ZXR250 has twin disks, you will need to buy 2 kits to rebuild them http://www.ebay.com.au/itm/Kawasaki...pt=UK_Motorcycle_Parts_13&hash=item256cb58d5d
Purchased! In the process of doing them now, getting the calipers prepped for paint, then in with the new seals and bleed nipples.
So, I need to rebuild both front calipers. Obviously the link is long expired, so I started doing some digging. Per megazip, everything but the piston inserts seems to interchange with Ninja 250. All-Balls seems to sell a rebuild kit but after 2 months of the worst email I’ve ever dealt with I can’t get them to confirm that those are part interchanges in their kits. Hell, all they’ve done is ask if I still need help over and over without answering any questions ever! Anyhow, enough ranting. Anyone ever run into a time Megazip was wrong or should I take the risk of ordering two Ninja 250 kits?
The link still works for me. https://www.ebay.com.au/itm/Kawasak...pt=UK_Motorcycle_Parts_13&hash=item256cb58d5d
