Separate names with a comma.
Here is my Mikuni TM box with balsa wood inserts. [ATTACH]
Rear is easy. 3.5" from the later model FZR250 3LN goes in without any modifications.
Fantastic books. Well worth the money
Can you please share the jetting you are using in the TMX30s.
I also saw it at Donnington.
It would be run at a constant speed and so can be tuned to be efficient at that engine speed. I don't know if it would be more or less efficient...
A friend was run over on his ebike and became a quadraplegic. Because the ebike was over the legal 200w his payout was reduced by 3 million dollars.
You might want to check your 2XT exhausts. I have a vague recollection that they may have had a restrictor welded into the header pipes. If you...
My TZR250 2XT F3 race bike uses the unmodified 2XT crankcases, reed blocks and reeds. NZ Cylinders stripped the Nickosil from the cylinders, bored...
What is a Yamaha TZR250 2XT? Yamaha showed the TZR250 1KT at the 1985 Tokyo Show and it went into production in 1986. It was a very expensive...
Lots of info on my 2XT and modifying TZR250s on this TZR Forum post: http://pure2strokespirit.net/forums/index.php?topic=175.0 I just write the...
Hi. I know lots about the 1988 TZR250 2XT. I race mine in Australian P6 Historic Road racing. It is heavily modified. I have converted most of...
CV on 2 stroke not a good idea. Slide carbs also work best in a still air box. How about getting an aluminium box fabricated. You could pollish it.
Pods work well on my 2 stroke race bikes. But they are big pods on big carbs inside a large still air enclosure. [IMG] [IMG]
IMHO My 250 is the best road bike I have ever ridden. And I have ridden plenty of bigger bikes.