Im chasing some parts or where to get parts for my 1994 ZXR250C. Have searched the net hi and low and cant find a few parts such as, valve cover 14024-1811, inner fairing vents 14024-1796, the ducts that go from the front fairing to the tank, a good used slip on pipe, cam chain and a few other bits! If you can help me that would be great, cheers!!
where in AUS are you? I have a Daishin exhaust (DIC exhaust).... second picture along is what it looks like.. it has been modded to fit ZXR https://www.google.com.au/search?q=daishin exhaust&safe=off&rlz=1C1EODB_enAU593AU593&espv=2&biw=1366&bih=705&source=lnms&tbm=isch&sa=X&ei=qmBDVJHDOIaA8gXdyIAQ&ved=0CAYQ_AUoAQ Also have a steel set of vent pipes... they are from the an A model.. as C model ones are known to perish
HiGSXR725, welcome Cam cover should be easy to find, hopefully someone here is parting out a motor and have a 14024-1811 14024-1796 Inner Cover NOS http://www.ebay.com.au/itm/KAWASAKI...-BLACK-14024-1796-NEW-OLD-STOCK-/330736986614 The ducts are almost impossible to find, keep an eye on ebay, there was a guy selling NOS a few years back, I bought a couple of sets, but they have been used now. Maybe try some vacuum cleaner hose from someone like clark rubber Cam Chain http://www.ebay.com.au/itm/CAM-CHAI...orcycle_Parts_Accessories&hash=item3f3e1bf37a Cheers Chris
Thanx for the help guys! Im opposite end of the country mate, North east Victoria!! My bike (actually my cousins bike, im just rebuilding it for him!) has the bolt on version of that pipe but is all rashed up from when my cousin slid the bike down the road!! Where are the vent pipes located?? I did spot that inner cover on ebay but couldn't find a left hand to go with it! Are these parts so rare that I should jump on the rh while its there and just hope a lh shows up sometime soon??
the ones between the fairing and the tank.. I also have the rubber mounts but the fairing ones are shiat... can any one say 100% that they will fit? dont want you to get them and it is one part that is not interchangeable
they don't fit out of the box, the tube on the tank is a slightly different size, but you can open the holes ever so slightly with a dremmel to get them on.