Are these ZXR250a fairings repairable

Hi guys,

Just wondering if you think these fairings are repairable. They are from my second zxr250a.

As I have worked out these are actually OEM fairings including the full air intake. Any idea how to replace the snapped off parts?

What would I be looking at cost wise?

Cheers

Tyson

 

snake stitch broken off pieces into place with a soldering gun. then do same on outside. sand outside and bog and roughen inner and fibreglass.

 

if you dont have the broken off bits then i wouldn't bother.

 

Hey Th3 Huntsman,

Yes they are most defienately repairable, however you need to look at the number of hours required to repair them then the cost of a quality paint job against buying some replica panels. if you do go replica panels, then the cost to paint a tank wouldnt be too bad to get it to match

Cheers

Chris

 

that's definately the toss up. I will look into it.

 

if i can find it i should have one piece the only part that is missing is at the top and goes behind the front cowling.

 

maybe just buy a second hand fairing for the piece that is cracked from someone wrecking a bike.

 

Most bike painters will have a stash of old abs fairings, they can use to insert little pieces into broken panels. I know Bob has some

 

Im in the same boat xcept im not missing any bits. Subscribed.

Not to hijack thread, but is it worth giving it a go painting yourself or not? I heard the chinese fairings are ****

 

I'm in the middle of sanding and repairing my fairings, and my damages where mild. I would STRONGLY recommend getting some other fairings.